|
|
EcoFlow 100
Energy Technology Group, Inc.
Biodiesel Performance Additive
EcoFlow 100 is a Completely New Additive Package for Treatment of B100 Bio-Diesel.
Proprietary Formulation based on proven technology.
Treats FAME derived biodiesel.
Provides Excellent Cold Weather Protection for SME, RME, CME, PME fuels.
Lowers CFPP by 15F to 20F.
Provides increased stability for Biodiesel.
Draws out and disperses water held in the fuel.
Inhibits bacterial and fungal growth in Biodiesel without need for pesticides.
?A? Rated Corrosion Inhibitor to Reduce Engine and Storage Tank Corrosion.
Reduces or eliminates formation of Gums, Varnishes, and Carbon in the fuel system.
Dramatically Slows Sludge Formation in Engine Oil.
Features and Benefits:
Fully formulated, Biodiesel additive
Protects against gelling and freeze-ups
Excellent Fuel System Cleaner
Corrosion protection
Totally disperses water
Inhibits growth of bacteria and fungi without need for pesticides.
Keep Out of Reach of Children
Directions:
For best results, use every time you add fuel to your storage tank, adding contents to tank prior to loading fuel. The fuel delivery process will ensure that complete and proper mixing takes place.
Use 1 gallon for each 100 to 1000 gallons of fuel (1:100 - 1:1000 treatment ratio).
EcoFlow 100 will disperse (eliminate) up to 1/6 of its own volume of water.
Results will vary depending on base product fuel is derived from.
Packaging:
32 oz. 25-250 US Gallons 12 per case 91315
1 US Gallon 100-1,000 US Gallons 4 per case 91316
2.5 US Gallon 5,000 US Gallons 2 per case 91316A
55 US Gallons 55,000 US Gallons 1 91319
275 US Gallons 275,000 US Gallons 1 91300
Larger Bulk sizes available, please contact us for pricing.
Storage and Blending:
Needs to be stored above 40°F.
If stored below 40°F, allow product to warm up to least 60°F before use.
Blending should take place with the B100 fuel at or above 60°F. For best results blend between 131F and 160F.
NOTE: (Blending below this temperature range may result in performance less than described. Blending below 60 °F may result in incomplete blending and or possible product separation).
Use all appropriate safety measures and extreme caution in blending at these temperatures.
For more information please consult the Material Safety Data Sheet for this product.
All used and unused product and its containers should be disposed of in accordance with all local, state, and federal regulations.
Product Sample Requests: Samples of this and other Energy Technology Group products are available for a modest charge plus applicable freight.
Due to the large number of requests for information and samples we have instituted a new program to speed processing.
To order samples, please click here
(Note: This will take you to a partner website handling these orders)
Notice to Purchaser: Energy Technology Group, Inc. provides no warranty of any kind with respect to the product whether express or implied including without limitation, the implied warranty of merchantability or fitness for any intended use or purpose; shall not be liable under any circumstances for any loss, damage, liability, injury or expense directly or indirectly resulting from, arising or related to the use or application of product; shall not be liable for consequential or incidental damages or loss of profits; and its liability shall be limited to replacement of the product.
Energy Technology Group, Inc.
Buffalo, NY (800) 759-2080
Created: 06/25/2005
Revised: 10/12/2008
Send mail to
sales@energytechnologygroup.com with
questions or comments about this web site.
|