Home Up Feedback Contents Search




Energy Technology Group - RTV Low-Volatile Silicone Gasket Maker



Product Description

With the touch of a finger, you can create a gasket of any size or shape. Unique dispenser keeps product fresh longer and is more economical to use than a cartridge or tube. RTV gasket material skins in about fifteen (15) minutes, and cures completely in twenty-four (24) hours. Product will not shrink or crack when used as directed.

Paint will not adhere to Silicone RTV.



O2 Sensors, Cam and Timing Covers, Exhaust Manifolds, Crossover Manifolds, all other sealing and gasket applications. Meets GM specs for O2 Sensors, Volatility (Silica Volatiles), tack-free time, cure-time, temperature range, resistance to hot oil and glycol.



  1. Completely remove old gasket material.
  2. Use a non-flammable cleaner to remove oil and grease. Make certain surface is clean and dry.
  3. Hold can upside-down and exert side pressure on dispensing stem with you finger. Draw an even bead of RTV (1/16" to 1/8" wide) on one mating surface.
  4. Using clean, dry cloth, or knife, remove any excess RTV Silicone.
  5. Wait approximately five (5) minutes for bead to begin to "skin" before assembling parts. Be sure parts are properly aligned when assembling. Be careful not to over-tighten bolts.



Do not store in temperatures above 120°F (50°C). Do not puncture, incinerate, or burn can. Do not place near sources of heat.



Health                      : 1                      Flash Point             : 212?F

Flammability           : 1                      Evaporation Rate   : N/A

Reactivity                : 0                      Color                      : Black

Personal Protection : B                      Odor                       : Acetate Acid

                                                          Solubility in Water : > 0.1



Part Number                               Size Can                      Cans per Case

Red - 996005                                                    7.25 oz.                                         12



Home ] Up ]

Send mail to  sales@energytechnologygroup.com with questions or comments about this web site.
Copyright © 2009 Energy Technology Group
Last modified: 08/14/11